OPERATION MACHINE CAB AND CHASSIS SEAT ADJUSTMENT When adjusting the operator's seat, stop the machine in a safe place before starting the operation. Adjust the seat before starting operations for the day or when changing operators. When adjusting the seat, put your back against the backrest and adjust to a position where the brake pedal can be fully depressed. Optional type (fabric) A. Fore-and-aft adjustment: Pull lever (1) up, set the seat to the desired position, then release the lever. Fore-and-aft adjustment: 160 mm (6.3 in.) (16 mm (0.6 in.) x 10 stages) B. Adjusting seat angle: Move lever (2) up and push down on the rear of the seat to tilt it backward.
Move lever (2) down and push down on the front of the seat to tilt it forward. Adjustment range: 13є (Front tilt, rear tilt: 4 stages each) C. Adjusting seat weight: Turn grip (3) to adjust the strength of the suspension. Adjustment range: (Target) 50 kg to 120 kg (110 to 265 lb.) D. Adjusting backrest angle: Move lever (4)up and move the backrest to the front or rear. When doing this, keep your back pressed against the seat back. If your back is not against the seat back, the seat back may spring forward suddenly. Adjustment range:
66є to the front (3є x 22 stages) 72є to rear (3є x 24 stages) If the seat back is reclined too far, the seat back may hit the rear glass, so use it in a position where it does not contact the glass. When reclining the seat fully to take a rest, set the seat in the following position. Fore-and-aft adjustment: Max. front position Up-down adjustment: Max. height Seat angle adjustment: Horizontal or fully tilted Reclining adjustment: Fully tilted backward 36 degrees (12 stages) E. Seat height adjustment: Move lever (2) up/down, then move the seat up or down as desired. Since lever (2) is also used for adjusting seat angle, set the seat to the desired height while adjusting the angle.
Adjustment range: 60 mm (2.4 in.) F. Headrest height adjustment: Move the headrest up and down to the desired height. Adjustment range: 50 mm (2.0 in.) G. Headrest angle adjustment: Rotate the headrest to the front or rear. H. Armrest angle: Adjust armrest angle by rotating knob (5) (left side only) Adjustment range: 30 degrees (forward tilt: 25 degrees; backward tilt: 5 degrees) Also, when armrest is turned, it will spring up (both left and right sides). WA480-5L 2-75