Komatsu — CHECK COOLANT LEVEL

CHECK COOLANT LEVEL OPERATION Do not open the radiator cap unless necessary. When checking the coolant, always wait for the engine to cool down and check the sub tank. Immediately after the engine is stopped, the coolant is at a high temperature and the radiator is under high internal pressure. If the cap is removed to check the coolant level in this condition, there is a hazard of burns. After waiting for the temperature to decrease, turn the cap slowly before removing it. This action allows the pressure inside the radiator to release gradually. When adding water, use the step and handrail to support yourself securely. 1.

Open side door (1) of the engine hood on the right side of the machine. 2. Look through inspection window (A) and check that the water level is in the range between FULL and LOW on sub tank (2). If the water level is low, open cover (3) and add water through the filler port of sub tank (2) until it reaches the FULL level. 3. After adding water, tighten the cap securely. 4. If sub tank (2) is empty, check for water leakage, then check the water level in the radiator. If the water level is low, add water to the radiator, then add water to sub tank (2). If the volume of coolant added is more than usual, check for possible water leakage. Confirm that there is no oil in the coolant. WA480-5L 2-79