2. Turn the directional selector switch actuation switch on the right switch panel ON. OPERATION Position (a): ON Position (b): OFF The pilot lamp inside the switch and the directional selector pilot lamp on the machine monitor light up. This actuates the operation of the directional selector switch. If the directional selector pilot lamp on the machine monitor flashes, the switch for the lever is in one of the following conditions. Set it to the correct position. When directional lever is not at N position. If the directional lever is not at the N position, the pilot lamp flashes, and at the same time, the central warning lamp lights up and the alarm buzzer sounds.
In addition, “E00 SHIFTLEVER NEUT” is displayed on the character display. In this condition, the machine will move forward or in reverse according to the set position of the directional lever. Return the directional lever to the N position. When directional selector switch is at F or R when engine is started. If the directional selector switch is at F or R, the pilot lamp flashes, and at the same time, the central warning lamp lights up and the alarm buzzer sounds. In addition, “E00 SHIFT SW NEUT” is displayed on the character display. In this condition, the engine will not start, so set the directional selector switch to N. 3.
Press the selector switch on the side of the control lever to the desired position. WA480-5L 2-95