3. Turn the parking brake switch to the “ON” position to apply the parking brake. OPERATION Remark When the parking brake is applied, the transmission is automatically returned to neutral. 4. Lower the lift arm and bucket to the ground. 5. Set safety lock lever to the LOCK position. 6. Do not park the machine on slopes. If the machine has to be parked on a slope, set it facing directly down the slope, then dig the bucket into the ground and put blocks under the tires to prevent the machine from moving. 7. Allow the engine to run at a low idle for about 5 minutes to cool down gradually.
Never shut down an engine that is over heating or has just finished work operations always allow it a time to cool down before turning the ignition key to the “OFF” position. WA480-5L 2-97