OPERATION 7. Always lock the following areas. (1) Fuel filler cap (2) Rear grill (3) Engine side cover (2 places) (4) Cab door (2 places) Remark The ignition switch key is used also for locks (1), (2), (3) and (4). TRANSMISSION CUT-OFF SWITCH When the transmission cut-off switch is pressed, the pilot lamp lights up, and the following transmission cut-off function is actuated. Position (a): OFF Position (b): ON When the left brake pedal is depressed, the brake is actuated, and in addition, the transmission is shifted to neutral at the pre-selected brake pedal depression position. Remark The cut-off function is actuated only with the left brake pedal.
When the transmission cut-off switch is at the “OFF” position, the left brake pedal works in the same way as the right brake pedal. For details of adjusting the brake pedal depression position, see “ADJUSTING THE TRANSMISSION CUT- OFF” on page 2-98. Raise or lower the pre-selected brake pedal depression position to adjust the cut-off to match the type of work. ADJUSTING THE TRANSMISSION CUT-OFF Apply the parking brake before adjusting the transmission cut-off position. In the transmission cut-off function, it is possible to adjust the depression position of the left brake pedal used to shift the transmission to neutral. 1.
Start the engine with the ignition switch (1), then set the parking brake switch (2) to the “ON” position. 2-98 WA480-5L