Komatsu — LOADING PILED SOIL OR BLASTED ROCK

4. At the same time you are thrusting the bucket into the material, raise the lift arm slightly to help keep the tires from slipping. While continuing to enter the pile of material, roll the bucket back to fully fill it. OPERATION 5. Once the bucket is full check the amount of material loaded into the bucket, then operate the bucket control lever to tilt the bucket and load back fully. Remark If the bucket edge is moved up and down while pushing in the bucket and digging, the front tires will come off the ground and this will cause the tires to slip. 6. If there is too much material loaded in the bucket, dump and tilt the bucket quickly to remove the excessive load.

This prevents spillage of the load during hauling. WA480-5L 2-105