Komatsu — LOADING AND SECURING THE MACHINE

OPERATION TRANSPORTING THE MACHINE Before transporting the machine be sure what you are using to transport the machine is capable of supporting the weight and size of the machine. Be sure it is wide enough and rated for the load. LOADING AND SECURING THE MACHINE Be sure the area you will be loading the machine in is flat and dry. Be sure the machine is free of mud or debris that may hinder loading. Check the ramps and support surfaces for damage, week spots, missing boards or excess ware. If these surfaces look unsafe, too week or unstable do not load the machine. Be sure the loading equipment and transportation equipment are in good condition and rated for your load.

Block the wheels on the trailer (D) before attempting to load the machine. Locate the tie down and transportation brackets (A & C)on the machine. Be sure they are in good condition. Position the machine squarely on the deck. Raise the loader bucket high enough to clear all surfaces. Once the machine has been loaded, rest the front bucket on the floor, set the machine in neutral and set the parking brake and lock the controls. Center the machines frame and lock the frame with the safety bar. Secure the machine with tie-downs/chains (C) at the anchor points shown in illustrations (A).

To help keep the machine in position, place blocks (B) in front and behind the front and rear wheels for extra support. Protect the exhaust stack from moisture if needed. WA480-5L 2-113