Komatsu — INSPECTION OF TIRES

MAINTENANCE INSPECTION OF TIRES If a tire or a rim is handled wrongly, the tire may burst or may be damaged and the rim may be broken and scattered, and that can cause serious injury and death. Because maintenance, disassembly, repair and assem- bly of the tires and rims require special equipment and skill, ask a tire repair shop to perform the work. Do not heat or weld the rim to which the tire is installed. Do not make a fire near the tire. Select the tires according to the conditions of use and attachments on the machine. Use only specified tires and inflate them to the specified pressure.

Because the indicated speed varies with the tire size, consult your Komatsu distributor when using optional tires. CHECKING TIRE PRESSURE When inflating a tire, check that no one will enter the working area and use an air chuck which has a clip and which can be fixed to the air valve. While inflating the tire, check the inflation pressure occasionally so that it will not rise too high. If the rim is not fitted normally, it may be broken and scattered while the tire is inflated. To ensure safety, place a guard around the tire and do not work in front of the rim but work on the tread side of the tire.

Abnormal drop of inflation pressure and abnormal fitting of the rim indicate a trouble in the tire or rim. In this case, be sure to ask a tire repair shop to perform repairs. Be sure to observe the specified inflation pressure. Do not adjust the inflation pressure of the tires just after high-speed travel or heavy-duty work. WA480-5L 3-41 Maximum load [kg (lb.)] Tire size Remarks Standard Front wheel 10,760 (23726) 23.5-25-20PR (L3 Rock) Rear wheel 10,760 (23726) 23.5-25-20PR (L3 Rock) If equipped Front wheel 11,140 (24564) 26.5-25-16PR (L3 Rock) Rear wheel 11,140 (24564) 26.5-25-16PR (L3 Rock) Front wheel 12,690 (27981) 26.5-25-20PR (L3 Rock) Rear wheel 12,690 (27981) 26.5-25-20PR (L3 Rock)