Komatsu — SELECTING THE PRINTOUT MODE

OPTIONS, ATTACHMENTS SELECTING THE PRINTOUT MODE (This functions only when the optional printer is installed.) 1. Check that the normal service meter and time are displayed on the character display. 2. Press the ( ‘ ) of monitor panel selector switch 1 and display “LOAD METER”. 3. Press the ( ‘ ) of monitor panel mode selector switch 1, then press the (>) or ( “PRINT TYPE”. 4. Press the ( ‘ ) of monitor panel mode selector switch 1. The bottom line will change to display the printout mode “A B C”. 5. Press the (>) or ( the desired printout mode. Three types of output mode (A, B, C) can be selected for the load meter printout. For details, see “PRINTOUT MODE” on page 5-20. 6.

After setting the printout mode, press the ( „ ) of monitor panel mode selector switch 1. If the monitor accepts it, the buzzer will give short sounds and the screen will return to the load meter display. 7. To print out in A or B mode, keep the load meter sub total switch pressed for at least 2 seconds and the data will be printed out. When printing out in C mode, the data will be printed out immediately when C mode is selected in Step 5. When the C mode printout is finished, the printout mode setting will return to A or B. 8. To stop the input operation midway, or if the input is mistaken, press the ( „ ) of monitor panel mode selector switch 1 to go back to the previous display.

WA480-5L 5-21