OPTIONS, ATTACHMENTS TORQUE CONVERTER LOCK-UP When traveling down slopes of a grade of more than 6°, never depress the accelerator pedal fully, regard- less of whether the torque converter lock-up switch is ON or OFF. It is extremely dangerous to drive fast. To prevent overrunning when traveling at high speed in the following cases, do not downshift. When traveling in F3 at a speed of more than 25 km/h (15.5 mph), do not downshift to F2. When traveling in F4 at a speed of more than 36 km/h (22.4 mph), do not downshift to F3.
When the actual speed range is 3rd or 4th in either FORWARD or REVERSE, the torque converter lock-up function is actu- ated according to the travel speed and sets to direct drive. To prevent overrun, the lock-up is automatically canceled to prevent the travel speed from going above 40 km/h (24.9 mph). GENERAL LOCATIONS 1. Torque converter lock-up switch 2. Torque converter lock-up pilot lamp 3. Shift indicator (displays actual speed range) 4. Character display TORQUE CONVERTER LOCK-UP SWITCH This switch (1) is the control switch for the torque converter lock-up function. Position (a): ON The pilot lamp inside the switch lights up and the lock-up is actuated according to the travel speed.
While the lock-up is engaged, the lock-up pilot lamp on the machine monitor lights up. Position (b): OFF The lock-up does not function. 5-22 WA480-5L