TORQUE CONVERTER LOCK-UP PILOT LAMP OPTIONS, ATTACHMENTS This monitor (2) lights up when the torque converter lock-up is engaged and the transmission actually enters direct drive. For details of (3) and (4), see “SHIFT INDICATOR” on page 2-24 and “FAILURE CODE DISPLAY” on page 2-12. METHOD OF OPERATION 1. Press the top (a) of the torque converter lock-up switch to turn it ON. The pilot lamp inside the switch lights up. 2. When the actual speed range is 3rd or 4th in either FORWARD or REVERSE, the torque converter lock-up function is actuated according to the travel speed and sets to direct drive. Remark When 4th is selected in auto-shift mode, the lock-up is not actuated in 3rd.
The lock-up is actuated only in the selected 4th gear. When the lock-up is actually actuated, the lock-up pilot lamp on the machine monitor lights up. 3. To cancel the lock-up, press the bottom (b) of the torque converter lock-up switch to turn it OFF. The lock-up is canceled. The travel speed for actuation and cancellation of the lock-up is as shown below. 4th speed range not used in Waste Handler applications. WA480-5L 5-23 Lock-ups Speed range FORWARD travel speed (km/h (mph)) REVERSE travel speed (km/h (mph)) Actuated Canceled Actuated Canceled 3rd 11 to 14 (6.8 to 8.7) 10 to 12 (6.2 to 7.5) 16 (9.9) 13 (8.1) 4th 21 to 24 (13.0 to 14.9) 19 (11.8) 22 to 25 (13.7 to 15.5) 20 (12.4)