OPTIONS, ATTACHMENTS STRUCTURE AND FUNCTION OF JOYSTICK STEERING The joystick steering system is used instead of a steering wheel. The joystick reduces operator fatigue by allowing light-touch steering operation with short joystick movement. If the joystick ON/OFF switch (1) is turned ON, electric current flows to the joystick controller and makes it possible to operate the steering with the joystick. When the joystick steering is in use, the joystick pilot lamp on the machine monitor lights up. With the joystick steering system, selecting the steering and transmis- sion is shown below. Also with the joystick steering, the transmission auto-shift is included.
The differences between operating a joystick steering and a steering wheel are as follows. *: Does not shift up above speed range of gearshift lever.
WA480-5L 5-35 Selection Operation using joystick lever Operation using steering wheel Joystick ON/OFF switch ON OFF Steering Steering using joystick lever (steering with steering wheel is also possible) Steering using the steering wheel Transmission F/N/R Operation using FNR switch at top of joystick lever Operation using transmission directional lever Transmission type Auto Auto Shift mode selector switch Manual Auto (L, M, H) Manual Auto (L, M, H) Selection of speed range Speed range selection using shift up, shift down switches at top of joystick lever * Automatic gear shift- ing according to travel speed Operation using gearshift lever Automatic gear- shifting according to travel speed