Komatsu — GETTING IN OR OUT OF THE OPERATOR'S CAB

OPTIONS, ATTACHMENTS JOYSTICK AND STEERING WHEEL OPERATION If the directional lever and joystick FNR switch are not at the neutral position, the neutral interlock circuit makes it impossible to switch the transmission directional control (when the joystick ON/OFF switch is ON, it is switched from the directional lever to the joystick FNR switch; when the joystick ON/OFF switch is OFF, it is switched from the joystick FNR switch to the directional lever). Do not use the joystick when traveling on public roads. Select the joystick lever or steering wheel according to the work. Steering using the joystick lever.

The joystick is suited for continuous loading operations on jobsites with ample space where the loading operation can be carried out with a comparatively relaxed cycle time. Because operations can be performed with small movements and light operating effort, this is also suitable for reducing operator fatigue when operating continuously. Steering using the steering wheel. The steering wheel provides excellent fine control and the ability to travel straight, so it is suitable for travel between jobsites and for load and carry operations.

In addition, it is also suitable for short cycle loading operations because it holds the upper part of the operator's body when frequently switching between FORWARD and REVERSE. GETTING IN OR OUT OF THE OPERATOR'S CAB Always spring the joystick console up before getting in or out of the operator's cab. If the console is sprung up, the safety switch is turned OFF and the joystick is automatically stopped from operating. The joystick console is a spring-up type, allowing the operator to get in and out of the operator's cab easier. If the joystick lever is moved accidentally when the engine is running, the machine may articulate unexpectedly.

To prevent this danger, always spring the joystick console up when not using the joystick for operations and when getting in or out of the operator's cab. 1. Set the lock lever (1) to the FREE position. 2. Spring the console (2) up. Turn it at least 90 degrees. The safety switch is turned OFF and the joystick cannot be operated. 3. When operating, lower the joystick console (2) and push lock lever (1) down to the LOCK position. The safety switch is turned ON and the joystick can be selected. 5-36 WA480-5L