Komatsu — JOYSTICK OPERATION

JOYSTICK CONSOLE ADJUSTMENT OPTIONS, ATTACHMENTS When adjusting the console, park the vehicle on a level and safe place. Adjust the console before starting operation or when the operator changed. Before adjusting the console, adjust the operator's seat so that the operator can fully press the brake pedal while his back is to the seat back. Height Adjustment 1. Operate lever (1) in the cancel direction and loosen the lock. 2. Adjust the height of the console and set joystick lever (2) to the desired position. Amount of adjustment: 30 mm (1.2 in.) 3. After setting, operate lever (1) to the LOCK position to lock it securely in position. Angle Adjustment, fore/aft position 1.

Operate lever (1) in the cancel direction and loosen the lock. 2. Adjust the height of the console and set joystick lever (2) to the desired position. Amount of adjustment: 30 mm (1.2 in.) 3. After setting, operate lever (1) to the LOCK position to lock it securely in position. JOYSTICK OPERATION It is dangerous to turn the machine suddenly at high speed, or to turn on steep hills. Do not operate the steering in such conditions. When turning, the articulation stops at the position where the steering wheel is turned to, but if the joystick is held in an operated position, the body will articulate fully.

The feeling when operating the steering with the joystick is different from when operating with the steering wheel, so be extremely careful until you have become use to operating the joystick. Check the adjustment and operation before starting the engine. For details, see “START-UP PROCEDURES” on page 2-83. 1. Before starting the engine, check the operation of the joystick lever steering, check that the transmission directional lever is at N, and that the surrounding area is safe. Remark Under the following conditions, a warning may be given when the engine is started.

If the joystick control lever FNR switch is at F or R, the joystick pilot lamp flashes, the central warning lamp lights up, and the alarm buzzer sounds. WA480-5L 5-37