Komatsu — JOYSTICK OPERATION

OPTIONS, ATTACHMENTS At the same time, “E00 J/S SW NEUTRAL” is displayed on the character display. In this condition, the engine will not start, so set the FNR switch to N. If the joystick is not at the N position, the joystick pilot lamp flashes, the central warning lamp lights up, and the alarm buzzer sounds. At the same time, “E00 J/S LEVER POSI” is displayed on the character display. In this condition, the engine will not start. Therefore, set the joystick lever to the N position. 2. Press the (a) part of the joystick ON/OFF switch to turn it ON. 3.

Operate the joystick lever in the direction (b) to turn the machine to the right; operate it in direction (a) to turn the machine to the left. The greater the angle of operation, the faster the articulating speed becomes. 4. It is possible to switch the articulating speed with the HI/LOW selector switch. Select the speed to match the operation. 5. When the machine has articulated to the desired angle, return the joystick lever to the N position. The joystick lever will return auto- matically to the N position. 6.

To return the direction of travel of the machine so that it travels in a straight line, operate the joystick lever in the opposite direction from the N position (for example, when the machine is articulated to the right, operate the joystick lever to the left). 7. Use the FNR switch at the top of the joystick lever to set the trans- mission to the direction of travel. N position: Neutral F position: FORWARD R position: REVERSE 5-38 WA480-5L