Komatsu — JOYSTICK OPERATION

OPTIONS, ATTACHMENTS Remark If the position of the directional lever and the FNR switch are different, the joystick pilot lamp flashes, the warning lamp lights up, and the alarm buzzer sounds. At the same time, “E00 SHIFT LEVER NEUTRAL” is displayed on the character display. In this condition, the machine will travel in the direction set by the directional lever, so set the directional lever to N. 8. To change the speed range, use shift up switch (1) or shift down switch (2) on the joystick lever. Remark The joystick steering is unstable and dangerous to operate at high speeds, so it is set so that the machine cannot travel in 4th.

When joystick operation is selected, if the gear shift lever is moved to 4th, or the joystick ON/OFF switch is turned ON when the gear shift lever is at 4th, the central warning lamp lights up and the alarm buzzer sounds. At the same time, “E00 SHIFT LEVER” is displayed on the character display. Set the gear shift lever within the range from 1st to 3rd. In addition, when the joystick operation is selected, machines equipped with a torque converter lock up, the system is designed so that the machine does not travel at a high speed even if the torque converter lock-up switch is turned ON. 9. Press part (b) of the joystick ON/OFF switch to turn it OFF. The joystick operation is then canceled.

WA480-5L 5-39