MAINTENANCE DCA4 Unit Guide Fleetguard Part No. DCA4 Units DCA4 Coolant Filter WF-2070 2 WF-2071 4 WF-2072 6 WF-2073 8 WF-2074 12 WF-2075 15 WF-2076 23 WF-2077 0 DCA4 Liquid DCA60L 4 (1 Pint) DCA80L 1760 (55 US gal) DCA4 Powder DCA95 20 DCA4 Precharge and Service Filters NOTE 1 - After draining and replacing coolant, always precharge the cooling system to maintain the DCA4 concentration between 1.0 and 2.0 units per 3.8 R (1 US gal). NOTICE: When performing service which requires draining the cooling system, discard the coolant. Reusing coolant can introduce contaminates or over concentrated chemicals, resulting in premature failure of cooling system components.
NOTE 2 - To precharge cooling systems larger than 114 R (30 gal) do the following: ! Install appropriate service filter listed in the above table based on cooling system capacity. Example: 95 gal (360 R ) cooling system capacity -15 Units (1) WF-2075 Filter 80 Units ! The answer represents the additional units required to precharge the cooling system. Four bottles of powder, part number DCA95, will provide a sufficient amount of DCA4 units (80) to precharge the example cooling system. ! Install the appropriate service filter at the next and subsequent maintenance intervals. NOTE 3 - Change the coolant filter at every engine oil and filter change interval to protect the cooling system.
Maintain a nominal concentration of 1.0 DCA4 unit per 3.8 R (1 US gal) of coolant in the system. Less than 0.5 unit per 3.8 R (1 US gal) indicates an under-concentrated coolant solution. More than 2.0 units per 3.8 R (1 US gal) indicates an over-concentrated coolant solution. 3-16 System Capacity Precharge Filter (See NOTE 1) Service Filter (See NOTE 3) Liters Gallons 19-29 30-41 42-60 61-79 80-117 118-190 5-7 8-10 11-15 16-20 21-30 31-50 WF-2072 WF-2073 WF-2074 WF-2075 WF-2076 (See NOTE 2) WF-2070 WF-2071 WF-2071 WF-2071 WF-2072 WF-2073