OPTIONS, ATTACHMENTS 28. HANDLING E.C.S.S. (ELECTRONIC CONTROLLED SUSPENSION SYSTEM) Always read this section before using the E.C.S.S. in order to enable you to use it safely and effectively. 28.1 STRUCTURE AND FUNCTION OF E.C.S.S. ! The E.C.S.S. uses the hydraulic spring effect of the hydraulic accumulator installed to the circuit at the lift cylinder bottom to absorb the vibration of the chassis when the machine is traveling. This enables the machine to travel smoothly at high speed. ! The E.C.S.S. consist of the E.C.S.S. switch, hydraulic accumulator, solenoid valves, and pressure switches. When the E.C.S.S.
switch is turned ON, the solenoid valves open, the circuit at the lift cylinder bottom is connected with the hydraulic accumulator, and the E.C.S.S. is actuated. When the E.C.S.S. switch is turned OFF, the solenoid valves close, the circuit at the lift cylinder bottom is shut off from the hydraulic accumulator, and the E.C.S.S. is not actuated. ! When the E.C.S.S. is actuated, the pressure switches automatically open and the close the solenoid valves in accordance with the bucket load to switch the accumulators. If the bucket is empty, the hydraulic accumulator for travel when empty is actuated; and if the machine is loaded, the hydraulic accumulator for travel when loaded is actuated.
This enables the damper to provide the most effective absorption of the travel vibration both when traveling empty and when traveling loaded. 5-6