Komatsu — 28.3 PRECAUTIONS WHEN OPERATING E.C.S.S.

OPTIONS, ATTACHMENTS 28.2 METHOD OF OPERATING E.C.S.S. The E.C.S.S. switch is at the top of the console box on the right side oof theoperator’s compartment. (1) OFF: E.C.S.S. canot be actuated (2) ON: E.C.S.S. is in actuation condition ! It is possible to carry out operation with the E.C.S.S. switch kept ON. If the damper is kept ON during operations, and the hydraulic pressure in the circuit at the bottom end of the lift cylinder exceeds 14710 kpa (150 kg/cmІ, 2130 psi) during operations, the solenoid valves are automatically closed, and the E.C.S.S. is canceled to protect the hydraulic accumulator from high pressure. 28.3 PRECAUTIONS WHEN OPERATING E.C.S.S. WARNING ! If the E.C.S.S.

switch is turned ON when the machine is traveling or when the work equipment is raised, the hydraulic accumulator for the E.C.S.S. is immediately connected to the circuit at the bottom of the lift cylinder, and the oil enters or leaves the hydraulic accumulator in the direction to maintain the balance. This means that the work equipment will move, so be extremely careful when operating the switch. ! If operations are carried out with E.C.S.S. switch kept ON, and the hydraulic accumulator is automatically switched by the action of the pressure switches during operation, the work equipment could immediately move. ! Never carry out inspection and maintenance with the E.C.S.S. switch kept ON.

This is extremely dangerous, as the work equipment could move. ! Always stop the machine and lower the equipment to the ground before operating the E.C.S.S. switch. ! When carrying out inspection and maintenance, also lower the work equipment to the ground then turn the E.C.S.S. switch OFF before starting the maintenance operation. REMARKS: ! If the starting switch is at the OFF position the E.C.S.S. will not work even if the E.C.S.S. switch is at the ON position. However, if the starting switch is at the ON position it is possible for the E.C.S.S. to be actuated, so it will switch to the actuation condition if the E.C.S.S. switch is turned ON. 5-7