24. SERVICE PROCEDURE 5. Boom-Arm coupling pin (1 point) 6. Arm cylinder rod end (1 point) 7. Bucket cylinder foot pin (1 point) 8. Arm-Link coupling pin (1 point) 9. Arm-Bucket coupling pin (1 point) 10. Link coupling pin (2 points) 11. Bucket cylinder rod end (1 point) 12. Bucket-Link coupling pin (1 points) 24.4.2 CHECK OIL LEVEL IN SWING MACHINERY CASE, ADD OIL 1. Remove dipstick G and wipe the oil from the dipstick with a cloth. 2. Insert dipstick G fully in the guide. 3. When dipstick G is pulled out, if the oil level is between the H and L marks of the gauge, oil level is proper. PC290-ENG 3-52 WARNING The oil is at high temperature immediately after the machine has been operated.
Wait for the oil to cool down before carry- ing out this check. WARNING