11. EXPLANATION OF COMPONENTS Manual setting 1. When the time is displayed, depress clock switch y for 2.5 sec or more. 2. “TIME” flashes. 3. Pressing H switch x increases hours and pressing M switch c in- creases minutes. If switch b or c is pressed for 2.5 seconds or more, hours or minutes increase continuously. 4. When the correct time is reached, press clock switch y . This com- pletes clock setting. If any of these monitors flashes, see 16.6.4 “ELECTRONIC CON- TROL SYSTEM”. PC290-ENG 2-11 b c or 2.5 sec or ff for 0 to 14 d ndard clock, .
This , com- the starting informations b c d Monitor indications Error mode E02 PC valve system error E03 Swing brake system error E05 Governor system error CALL Non-operating error