11. EXPLANATION OF COMPONENTS 11.1.5 E: SWITCHES y v x c b 1. WORKING MODE SELECTOR SWITCH (Basic switch) This switch is used to set the movement or power for the work equip- ment. By selecting the mode to match the working conditions, it is possi- ble to carry out operations more easily. H.O. (heavy-duty operation mode) lights up: This is used for heavy-duty work. G.O. (general operation model lights up: This is used for ordinary work. F.O. (finishing operation mode) lights up: This is used for levelling or grading work. L.O. (lifting operation mode) lights up: This is used for fine control operations. B.O. (breaker operation mode) lights up: This is used for breaker work.
H/O G/O F/O L/O B/O When starting the engine, G.O. (general operation) mode is auto- matically selected. Each time the switch is pressed, the mode selection changes. NOTICE When the breaker is used, never select the H.O. (heavy-duty operation) mode. REMARK H switch is also used for setting “hours” in the clock and M switch for setting “minutes”. See 11.1.4-5 “DISPLAY”. PC290-ENG 2-12