11. EXPLANATION OF COMPONENTS HYDRAULIC OIL FLOW When the front part of the pedal is depressed, the hydraulic oil flows into the left-hand work equipment piping, and, when the rear part of the pedal is depressed, the oil flows into the right-hand work equipment pip- ing. (When equipped with breaker, depress only the front part of the pedal.) 6. SELECTOR VALVES FOR BREAKER AND GENERAL ATTACHMENT (crusher, etc.) Contact dealer to set left hand boom piping relief pressure. y When using the breaker and the general attachment (Crusher etc.), turn the rotors of the 3 way valves y to change over according to the following illustration.
(The marks indicating the port direction are stamped on the 3-way valve.) NOTICE Perform work only after the engine is stopped and the work equipment and machine body are in a stable posture on the ground. REMARK For details, see 28. “MACHINE READY FOR ATTACHMENTS” PC290-ENG 2-24