11. EXPLANATION OF COMPONENTS 11.14 FUSE NOTICE Before replacing a fuse, be sure to turn off the starting switch. The fuses protect the electrical equipment and wiring from burning out. If the fuse becomes corroded, or white powder can be seen, or the fuse is loose in the fuse holder, replace the fuse. Replace a fuse with another of the same capacity. Fuse capacity and name of circuit PC290-ENG 2-35 No Fuse capacity Name of circuit y 10A Governor/Pump controller x 10 A Solenoid valves c 20 A Air Conditioner (motor) v 20 A Right head lamp, Work lamps (Boom LH & RH), Engine room lamp, Heated seat.
b 20 A Cigarette lighter, Heater,Window washer, Left knob button n 10 A Horn m 15 A Wiper controller h 20 A Cab mounted work lamps (x3), Beacon j 20 A Lower wiper, Refuelling pump j 10 A Key switch signal k 15 A Work lamps (Left hand deck, counterweight) l 10 A Spare m 10 A Alarm buzzer, Monitor n 20 A Battery relay, Ribbon heater, Start signal o 10 A Cab lamp, Radio p 10A Spare fuse q 10A Spare fuse r 15A Spare fuse s 20A Spare fuse