Komatsu — Komatsu PC290NLC-6K and PC290LC-6K Hydraulic Excavator Operation & Maintenance Manual

11. EXPLANATION OF COMPONENTS 11.15 FUSIBLE LINK If the starting motor will not rotate when the starting switch is turned ON, a possible cause is disconnection of wire-type fusible link a . Open the battery room door on the left side of the machine body to inspect the fusible link and, if necessary, replace it. REMARK A fusible link refers to the large-sized fuse wiring installed in the high current flow portion of the circuit to protect electrical components and wiring from burning, similar to an ordinary fuse. 11.16 CONTROLLERS A combined pump and engine controller is provided. NOTICE Never splash or spill water, mud or drink over the controllers as this may cause a fault.

If a fault occurs in the controller, do not attempt repair, but con- sult your Komatsu distributor. 11.17 TOOL BOX The tray c is used for keeping the tools. 11.18 REFUELLING PUMP (Option) 1. When the machine is operated on sites with no fuel container and pump, the machine may be refuelled using the refuelling pump a (if fitted) from fuel barrels. The refuelling pump is located next to batteries at the front right hand side of the machine. 2. Place the fuel hose b , which is stored in tray c into the fuel barrel placed next to the machine. 3. Switch on refuelling pump using switch d on the pump assembly when adding fuel, never let the fuel overflow. This may cause a fires.

Notes This pump is protected bay fuse e . If pump fails to function check fuse (10A). Ensure strainer on hose end is clean. e PC290-ENG 2-36 WARNING • Do not bring fire or sparks near the fuel. WARNING ON OFF 0