A WARNING: For reasons of safety, al- ways follow these safety precautions. 8. PRECAUTIONS FOR MAINTENANCE 8.2 DURING MAINTENANCE —|PERSONNEL+ e Only authorised personnel can service and repair the machine. Extra precaution should be used when grinding, welding, and using a sledge-hammer. —| ATTACHMENTS | e Place attachments that have been removed from the machine in a safe place so that they do not fall. If they fall on you or others, serious injury could result. —jWORK UNDER THE MACHINE } e Always lower all movable work equipment to the ground or to their lowest position before performing service or repairs under the machine. ¢ Always block the track shoes of the machine securely.
e Never work under the machine if the machine is poorly supported. a —|KEEP THE MACHINE CLEAN | ¢ Spilt oil or grease, or scattered tools or broken pieces are dangerous because they may cause you to slip or trip. Always keep your machine clean and tidy. ¢ If water gets into the electrical system, there is danger that the machine may not move or may move unexpectedly. 1-24 PC160/180/200-6k-ENG Do not use water or steam to clean the sensors, connectors, or the inside of the operator’s compartment.