A WARNING: For reasons of safety, always follow these safety precautions. 8. PRECAUTIONS FOR OPERATION — PRECAUTIONS WITH BATTERY | ¢ When repairing the electrical system or when carrying out electrical welding, remove the negative (-) terminal of the battery to stop the flow of current. | HANDLING HIGH-PRESSURE HOSES |¢ Do not bend high-pressure hoses or hit them with hard objects. Do not use any bent or cracked piping, tubes or hoses. They may burst during use. ¢ Always repair any loose or broken fuel hoses or oil hoses. If fuel or oil leaks, it may cause a fire.
PC 160/180/200-6k-ENG —| PRECAUTIONS WITH HIGH PRESSURE OIL| e Do not forget that the work equipment circuits are always under pressure. ¢ Do not add oil, drain oil, or carry out maintenance or inspection before completely releasing the internal pressure. ¢ If oil is leaking under high pressure from small holes, it is dangerous if the jet of high-pressure oil hits your skin or enters your eyes. Always wear safety glasses and thick gloves, and use a piece of cardboard ora sheet of wood to check for oil leakage. e If you are hit by a jet of high-pressure oil, consult a doctor immediately for medical attention. # 1-25