hitachi — 850.indb

MAINTENANCE MAINTENANCE GUIDE A. GREASING (See Page 7-9) 2000 1 Front Joint Pins 2. Swing Bearing NOTE: Grease every 10 hours for first 100 hours. Maintenance required when operating in water or mud. NOTE: Grease the bucket joint pins, swing bearing, and swing gear only using a grease gun even if the auto-lubrication de- vice is kept activated. B. ENGINE OIL (See Page 7-20) NOTE: Change 250 operating hours, if the content of sulfur of fuel is 2000 ppm or more. Consult your nearest Hitachi dealer for the detail. C.

TRANSMISSION OIL (See Page 7-24) 7-6 Quantity 10 50 100 250 500 1000 Boom Pivot Boom Cylinder Bottom End 4 ★ Bucket and Link Pins Backhoe 9 ★★ Others Backhoe 7 ★ 3 1 Parts Quantity Interval (hours) 10 50 100 250 500 1000 2000 1. Engine oil Oil Level Check — 2. Engine oil Change 57 L (15.1 US gal) ★ 3. Engine oil Filter Replacement 2 ★ Parts Quantity Interval (hours) 10 50 100 250 500 1000 2000 1. Pump transmission (Engine oil) Oil Level Check — Change 6.2 L (1.6 US gal) Clean Air Breather 1 2. Swing Reduction Gear (Gear oil) Oil Level Check 2 Change 15 L×2 (4.0 US gal×2) 3. Travel Reduction Gear (Gear oil) Oil Level Check 2 Change 19 L×2 (5.0 US gal×2)