Transmissions 3. Depress the clutch pedal to the floor. Shift into low or 1st gear, then engage the clutch, with the engine at or near idle rpm, to start the vehicle moving. the transmission will automatically shift from high range to low range. 4. Shift progressively upward from low or 1st gear through 4th gear, double-clutching between shifts. 3. With the transmission in low range, downshift through the low range gears as conditions require. Operation, 10-Speed Models Upshifting Use only enough speed to keep the engine above peak torque rpm after the upshift. The engine may need to be at rated rpm before upshifts. 1. Position the gear shift lever in neutral. See Fig. 5.5 or Fig.
5.6 for the shift pattern. Start the engine, and bring the air system pressure up to 95 to 125 psi (655 to 862 kPa). 5. While in the 4th gear and ready for the next upshift, flip the range preselection lever up into high range. Double-clutch through neutral, and shift into 5th gear. As the shift lever passes through neutral, the transmission will automatically shift from low range to high range. 2. Position the range preselection lever down, into low range. 6. With the transmission in high range, shift progres- sively upward through 8th gear, double-clutching between shifts. 3. Depress the clutch pedal to the floor.
Shift into 1st gear; then, engage the clutch with the engine at or near idle rpm to start the vehicle moving. Downshifting 4. Shift progressively upward from 1st gear through 5th gear, always double-clutching between gears. 1. With the transmission in high range, shift progres- sively downward to 5th gear, double-clutching be- tween shifts. Use only enough speed to keep the engine above peak torque rpm after the upshift. The engine may need to be at rated rpm before upshifts. 2. When in 5th gear and ready for the next downshift, push the range preselection lever down into low range. Double-clutch through neutral, and shift into 4th gear. As the shift lever passes through neutral, 5.
While in 5th gear and ready for the next upshift, flip the range preselection lever up into high range. Double-clutch through neutral, and shift into 6th gear. As the shift lever passes through neutral, the 5.6