Freightliner Business Class — Business Class Driver's Manual

Transmissions passes through neutral, the transmission will auto- matically shift from low range to high range. NOTE: Never fully depress the clutch pedal to use the clutch brake when downshifting, or as a brake to slow the vehicle. 9. Release the clutch pedal, and let the engine slow until the road speed and engine rpm match. 10. Partially depress the clutch pedal, and move the shift lever into the lowest gear in the high range-5th gear in nine-speed models, 6th gear in 10-speed models. Meritor Splitter and Range- Shift Models General Information, Splitter and Range-Shift Downshifting 11. Double clutch and continue upshifting.

The Meritor 13-speed transmission has 13 forward speeds and two reverse speeds. Each transmission consists of a five-speed front section, and a three- speed auxiliary section. The auxiliary section contains low- and high-range ratios, plus, an overdrive splitter gear. See Fig. 5.16 . 1. With the transmission in high range, shift progres- sively downward to the bottom gear in high range, 5th gear in nine-speed models, 6th gear in 10- speed models. Double-clutch between shifts. See Table 5.1 . 2. When in the bottom gear of the high-range shift pattern, and ready for the next downshift, push the range selection lever down into low range.

Double- clutch through neutral, and shift into the top gear of the low-range shift pattern. As the shift lever passes through neutral, the transmission will automatically shift from high range to low range. All of the 13 speeds are controlled with one shift lever. Built into the shift knob of the lever, are a range selec- tion lever and a splitter control button (on the side of the shift knob) that control range selection and gear splits, respectively. Low gear in the front section is used only as a starting ratio. The remaining four forward positions are used once in the low range and once in the high range.

How- ever, each of the four high range gear positions can be split with the overdrive ratio of the splitter gear. Ratios cannot be split while the transmission is in low range. 3. With the transmission in low range, downshift through the low range gears as conditions require. 5.25