Freightliner Business Class — Business Class Driver's Manual

Transmissions Reverse Hi R 1 3 Dir OD 5 5 Dir OD 7 7 1 To drive in reverse, push the range selector lever down and put the transmission in the low range. Push the clutch pedal to the bottom of its travel, so that the clutch brake slows the transmission for initial gear en- gagement. While holding the clutch pedal at the bottom of its travel, shift into reverse. Lo A N B C 2 4 LOW Dir OD Dir OD 6 6 8 8 D Slowly release the clutch pedal and move the vehicle in reverse. 03/13/96 f260154a Upshifting A. High Range B. Low Range C. Overdrive D. Direct Drive 1. Splitter Control Button 1.

To drive forward, make sure the vehicle is com- pletely stopped and that the range selector lever is pushed down, to put the transmission in the low range. Operation, Splitter and Range-Shift Fig. 5.16, Meritor 13-Speed Transmission Shift Pattern 2. Push the clutch pedal to the bottom of its travel, so that the clutch brake slows the transmission for ini- tial gear engagement. While holding the clutch pedal at the bottom of its travel, shift into low. IMPORTANT: The shifter knob has an interlock feature that prevents the splitter control button from being moved up when the range selection lever is down (in the low range).

When the trans- mission is in the high range, and the splitter con- trol button is up, the range selection lever cannot be moved down. 3. Slowly release the clutch pedal and begin moving the vehicle forward. 4. To upshift into 1st gear, only partial depression of the clutch pedal is needed. Do not push the clutch pedal all the way to the floor and engage the clutch brake. Instead, partially depress the clutch pedal, and move the shift lever into neutral. 5.26