Transmissions 5. Release the clutch pedal, and allow the engine to decelerate until the road speed and the engine rpm match. Accelerate the engine only after the transmission has shifted. 6. Partially depress the clutch pedal, and move the shift lever into 1st gear. 12. To shift from 5th overdrive to 6th direct, partially disengage the clutch, shift into 6th—but before en- gaging the clutch—flip the splitter control button down into the direct drive position. Then engage the clutch, and accelerate the engine. 7. Double clutch and continue upshifting until in 4th gear. See Table 5.1 . 8.
To upshift into high range—with the transmission still in 4th gear—push the range selection lever up and put the transmission into high range, then par- tially depress the clutch pedal and move the shift lever into neutral. As the shift lever passes through neutral, the transmission will automatically shift from low range to high range. NOTE: Do not move the control button while the shift lever is in neutral. 13. Shift upward through each of the high range gears, alternating the procedures in steps 10 and 11, above. Downshifting 9. Release the clutch pedal, and let the engine slow until the road speed and engine rpm match. 1.
Downshift from 8th overdrive to 8th direct without moving the shift lever. Flip the splitter control button down to the direct drive position; then, immediately release the accelerator, and press and release the clutch pedal. Accelerate the engine only after the transmission has shifted. 10. Partially disengage the clutch, and move the shift lever into 5th gear. 11. To upshift from 5th gear into 5th overdrive, flip the splitter control button up to the overdrive position; then, immediately release the accelerator, and press and release the clutch pedal. It is not neces- sary to move the shift lever when shifting from di- rect to overdrive.
The transmission will shift when synchronization with the engine’s speed is reached. 2. To downshift from 8th direct to 7th overdrive, flip the splitter control button up to the overdrive posi- tion; then, immediately double-clutch through neu- tral, moving the shift lever from 8th to 7th gear. 3. Downshift through each of the high range gears alternating the procedures in steps 1 and 2 above, until reaching 5th direct. 5.27