Freightliner Business Class — Business Class Driver's Manual

Transmissions 4. While in 5th direct, and ready for the next down- shift, push the range selection lever down into low range. Double-clutch through neutral, and shift into 4th gear. See Fig. 5.16 . As the shift lever passes through neutral, the transmission will automatically shift from high range to low range. 1 3 5 N 5. With the transmission in low range, downshift through the low range gears as conditions require. R 6 2 4 NOTE: Never fully depress the clutch pedal to use the clutch brake when downshifting, or as a brake to slow the vehicle. 05/03/2001 05/03/2001 f261098 Fig.

5.17, Shift Pattern, MBT Transmissions Mercedes-Benz Manual Transmissions While traveling, check the tachometer regularly to be sure the engine speed is within the most economical range (1400-2000 rpm). On level roads, drive in the highest usable gear, keep- ing engine speed down. CAUTION When approaching an uphill grade, shift down ahead of time to prevent loss of engine rpm. When approaching a downhill grade, shift down ahead of time to prevent runaway speed. Operating a manual transmission with the fluid level higher or lower than recommended can result in transmission damage. Change gears only when absolutely necessary. Skip gears if needed.

Mercedes-Benz (MBT) transmissions use a simple 6-speed gear pattern as shown in Fig. 5.17 . An unloaded vehicle can be started in second gear on level roads or slight grades. Loaded vehicles, or ve- hicles on substantial grades, must be started only in first gear. When shifting, always press the clutch pedal all the way down. Do not force the gear lever. Before shifting into reverse, be sure the engine is idling and the vehicle is not moving. 5.28