Transmissions does not cause any damage to the transmission. Allow at least five seconds for the fluid to refill. Electronic Control Unit (ECU) The ECU processes data input from sensors and switches, determines gear shift and lockup timing, and transmits signals to the solenoids. Aisin A581 Automatic Transmission General Information, Aisin Speed Sensor The speed sensor detects running speed (transmission output shaft revolution rate) and transmits speed signals to the ECU. The Aisin A581 automatic transmission has five forward gear selections and one reverse gear selection.
The automatic transmission is comprised of a three-element, single-stage and two-phase type torque converter which is a planetary gear unit comprised of three sets of wet multiple disk clutches, three sets of multiple disk brakes, and three sets of planetary gears; an oil pres- sure control system containing an oil pump and valves; and a computer that automatically shifts gear positions based on vehicle running conditions, such as speed and load. Turbine Revolution Sensor The turbine revolution sensor detects running speed (transmission output shaft revolution rate) and transmits turbine revolution signals to the ECU.
Oil Temperature Sensor The oil temperature sensor detects oil temperatures in the oil pan and transmits oil temperature signals to the ECU. Operation, Aisin Neutral Start Switch Gear shift and lockup operation of the A581ATM is con- trolled by computer and is based on vehicle running conditions, such as throttle opening rate, speed, and gear positions. The A581ATM is provided with POWER/ ECONOMY pattern modes. Through this switch, gear shift and lockup timings can be selected based on load and road surface conditions.
The neutral start switch detects shift positions (R, N, D, 3, 2, and L) specified when the driver positions the shift selector lever and transmits corresponding signals to the ECU. 5.39