Freightliner Business Class — Business Class Driver's Manual

Clutches, Rear Axles, and Steering road conditions. Disengage the interaxle differential lockout before shifting the axle to a higher range. When the interaxle differential lockout control valve is in the UNLOCK position, the interaxle differential allows differential action between the axles thereby compen- sating for different wheel speeds and variations in tire size. Keep the interaxle differential lockout in the UN- LOCK position for normal driving on roads where trac- tion is good. On two-speed axles, the interaxle differen- tial must be in the UNLOCK position before attempting to shift the axles out of low or high range.

10 ° 10 ° 1 2 Steering System General Information 10 ° 10 ° f460307a 05/24/94 1. 8 o’Clock 2. 4 o’Clock When there is no load on the vehicle, and the front tires are pointed straight ahead, the steering wheel spokes should be at the 4 and 8 o’clock positions, or within 10 degrees of either side. See Fig. 6.4 . See Group 46 of the Business Class ® Trucks Service Manual for steering adjustment procedures. Fig. 6.4, Steering Wheel Centered driven by the engine, provides the power assist for the steering system. If the engine is not running, there is no power assist.

If the power assist feature does not work due to hydrau- lic fluid loss, steering pump damage, or some other cause, bring the vehicle to a safe stop. Do not drive the vehicle until the cause of the problem has been cor- rected. Power Steering System The power steering system consists of an integral steer- ing gear (which includes a manual steering mechanism, a hydraulic control valve, and a hydraulic power cylin- der), hydraulic hoses, power steering pump, reservoir, and other components. The power steering pump, 6.9