Clutches, Rear Axles, and Steering axle range by moving the range preselection lever lo- cated on the shifter knob (see Fig. 6.2 ). hicle motion is required to ensure engagement of the axle. Dual Range Two-Speed Tandem Axle Operation with Multispeed Transmissions IMPORTANT: See "Eaton Interaxle Differential Lockout Operation" for precautions that must be taken when shifting axles in relation to the inter- axle differential lockout. NOTE: See Chapter 5 , "Transmissions," for de- tailed information on how to use the range prese- lection lever. On multispeed transmission applica- tions, the two-speed axle should be used as a dual range.
Use the low range when operating off- highway or when starting out with a heavy load on-highway. After the vehicle is moving on the highway, the axle can be shifted to high range. Eaton Interaxle Differential Lockout Operation Interaxle differential lockout systems include a lockout control valve located in the cab, and an air-operated shift unit mounted on the forward rear axle. To shift the axle to the high range, make sure the inter- axle differential lockout is disengaged, keep the throttle pedal down, move the range preselection lever to high, release the throttle pedal until the axle shifts, then ac- celerate.
When the interaxle differential lockout control valve is in the LOCK position, the interaxle differential is locked out and the driveshaft becomes a solid connection between the two axles. Power entering the forward axle is also transmitted straight through to the rear axle, so both axles turn together at the same speed. The LOCK posi- tion should be used when additional traction is needed. To shift the axle to the low range, keep the throttle pedal down, move the range preselection lever to low, release and depress the throttle pedal quickly to in- crease engine rpm. The axle will shift to low range. CAUTION NOTE:
When parking the vehicle, put the axle in the low range with the engine running. Engage the clutch and transmission to be sure the axle has completed the shift into the low range. Some ve- Engage the lockout only when stopped or at slow speeds and never when the wheels are spinning. Do not operate the axles on dry pavement with the lockout engaged for prolonged periods. Use only when additional traction is needed under adverse 6.8