Freightliner Business Class — Business Class Driver's Manual

Brakes stop. Before continuing operation of the vehicle, correct the cause of the air loss. IMPORTANT: An air brake proportioning system is used in tractor air brake systems. When operating in bobtail mode, the rear brake chambers (whose axle load has been greatly reduced) receive less air pressure, while the front axle brake chambers receive full normal air pressure. This results in a different brake pedal feel, as the pedal seems to require more travel and/or effort to slow or stop the vehicle. However, the air brake proportioning system actually improves vehicle control when the tractor for the bobtail mode of operation.

When the tractor is towing a trailer, the rear brake chambers will receive full (normal) air pressure. WARNING Do not drive the vehicle with the parking brakes caged; there would be no means of stopping the vehicle and this could result in serious personal injury or vehicle damage. Before caging the spring parking brakes, make the connection to a towing vehicle or chock the tires. NOTE: Before a vehicle with insufficient system air pressure can be moved, the spring parking brakes must be released by applying an external air source at the gladhands, or by manually caging (manually releasing) the parking brake springs.

During normal brake stops, push the foot brake control pedal until braking action slows down the vehicle. In- crease or decrease the pressure on the pedal so that the vehicle comes to a smooth, safe stop. As the ve- hicle nears full stop, push the clutch pedal in and shift the transmission into neutral. Apply the spring parking brakes if the vehicle is to be parked. After correcting the brake system problem, uncage the spring parking brakes before resuming normal vehicle operation. Operation IMPORTANT:

If service brakes are totally lost but full system air pressure is available, immediately use the parking brake control valve (yellow knob) to bring the vehicle to a complete stop in the saf- est available location. Before driving the vehicle, secure all loose items in the cab so that they will not fly forward during a full brake application. Make sure that all occupants are wearing seat belts. The yellow diamond-shaped knob ( Fig. 7.1 ) on the con- trol panel actuates the parking brake valve. Pulling out 7.2