Fifth Wheels the guide plate. The fifth wheel may have to be moved slightly to enable the locking wedges to fully enter the locked position. When the slide release pull handle returns to the fully locked position, visually and physi- cally check the locking wedges to make sure they are fully inserted into the slots in the slide rails. Make sure the slide release pull handle is locked in position against the guide plate. WARNING Adjust the fifth wheel slide correctly, and do not overload any tractor axle by improperly loading the trailer.
Incorrect slide adjustment or improper axle loading could cause erratic steering and loss of ve- hicle control, possibly resulting in serious personal injury or death. 9. The amount of load distribution on the front steering axle and rear drive axle(s) will have a direct effect on the steering control of the vehicle. Determine the front and rear axle weights by weigh- ing the vehicle on scales designed for this purpose. The maximum axle weight ratings are given on the Federal Motor Vehicle Safety Standard (FMVSS) label or Canadian Motor Vehicle Safety Standard (CMVSS) label attached to the left rear door post of the tractor.
The desired load on the axle is no less than 80 percent of the maximum axle weight rating, but in no instances should the axle load exceed the maximum axle weight rating given on the FMVSS or CMVSS label. 8.14