Freightliner Business Class — Business Class Driver's Manual

Fifth Wheels 6. Slowly move the tractor forward or backward until the fifth wheel is in the desired location. 7. Apply the tractor parking brakes. NOTE: The fifth wheel may have to be moved slightly to enable the locking wedges to enter the fully locked position. 8. Lock the sliding member in position using one of the following methods: WARNING Physically check to be sure that the locking wedges have seated in the slots. Failure to achieve com- plete lockup may allow disengagement of the trac- tor from the trailer, possibly resulting in serious personal injury or death. 05/19/94 f310050 Fig.

8.10, Fontaine Sliding Fifth Wheel Manual Release CAUTION 8.1 For air-operated release models, set the cab-operated slide control switch to LOCK. Visually inspect the locking wedges to make sure that they are fully inserted in the slide rail slots. After moving the fifth wheel to the desired position, be sure the trailer landing gear will not, at any time, come in contact with the tractor frame or other components. Make sure that the front of the trailer will not come in contact with the rear of the cab or with other components if they extend beyond the rear of the cab. 8.2 For manual release models, disengage the slide release pull handle from the guide plate.

The slide release pull handle is spring- loaded in the locked position and will seek the locked position when disengaged from 8.13