Freightliner Business Class — Business Class Driver's Manual

Fifth Wheels slide locking wedges must be in the locked posi- tion. This prevents the sliding member from moving rapidly to the far forward or rearward position, which could damage the fifth wheel member or kingpin. Fifth Wheel Slide Operation 1. Connect the trailer kingpin to the tractor fifth wheel. For instructions, refer to Fontaine "Fifth Wheel Locking Operation," in this chapter. 2. After positive lockup of the fifth wheel lock mecha- nism has been accomplished, release the slide us- ing one of the following methods: 9/07/95 f310489 Fig. 8.9, Cab Control, Fifth Wheel Slide 2.1 For air-operated release models, set the cab-operated control switch ( Fig. 8.9 ) to UNLOCK. 4.

Pull the trailer air supply valve to cut off the air sup- ply to the trailer. 2.2 For manual release models, lift the slide re- lease pull handle to disengage it from the guide plate. Then, pull out the handle ( Fig. 8.10 ) until it is in the unlocked position and can be positioned against the guide plate to hold it out. The slide release pull handle will stay in the unlocked position until it is manually disengaged from the guide plate. WARNING Do not use the trailer air supply for parking trailers not equipped with spring parking brakes. This ap- plies the trailer service brakes only. As air bleeds from the trailer brake system, brake application is lost.

This could allow the unattended vehicle to roll away, possibly resulting in serious personal injury or death. 3. Lower the trailer landing gear just enough to re- move the weight from the tractor. 5. Chock the front and rear of the trailer tires to pre- vent the trailer from moving. 8.12