Vehicle Access and Features Isolator To engage the isolator, put the lever in the center posi- tion. Lock out the isolator by moving the lever to the right. Bottom Cushion Tilt Adjustment Rotate the knob to increase or decrease bottom cush- ion tilt. Lumbar Support 5 Turn the knob for precise fit. Dura-Form Seats (Fig. 2.10) 1 NOTE: Some of the following controls are not available, or are optional, on some Dura-Form seats. 4 Back Cushion Tilt 03/11/97 f910210 2 3 To tilt the back cushion through a range of 10 degrees, push down on the handle. Move the back cushion to the desired position and release the lever. 1. Back Cushion Tilt Handle 2. Height Adjustment Knob 3.
Isolator Lockout and Fore-Aft Seat Adjustment Lever 4. Seat Cushion Adjustment 5. Lumbar Support Lever Height Adjustment Push in the knob to inflate the suspension and raise the seat height. Pull out on the knob to deflate the suspen- sion and lower the seat height. Fig. 2.10, Dura-Form Seat 2.11