Vehicle Access and Features Isolator Lockout and Fore-Aft Seat Adjustment Seat Belts and Tether Belts General Information Move the lever to the left to adjust the seat to the de- sired fore-aft position. Move the lever to the center posi- tion to lock out the isolator feature. Move the lever to the right to engage the isolator. Seat belt assemblies are designed to secure persons in the vehicle to help lessen the chance of injury or the amount of injury resulting from accidents or sudden stops. For this reason, Freightliner LLC urges that the driver and all passengers, regardless of age or physical condition, use seat belts when riding in the vehicle.
Seat Cushion Adjustment To put the seat cushion in the upper position, lift upward on the front of the cushion, then push rearward. To put the seat cushion in the lower position, pull forward and then push downward. Seat belt assemblies in the vehicle meet Federal Motor Vehicle Safety Standard 209, "Type 1," and "Type 2" requirements. They are recommended for all persons weighing over 50 pounds (23 kg). Lumbar Support Rotate the lever on the right side of the back cushion to any of the three positions as desired. A child restraint system should also be provided for each child weighing 50 pounds (23 kg) or less.
It should meet the requirements of Federal Motor Vehicle Safety Standard 213, "Child Restraint Systems." When provid- ing such a restraint system, carefully read and follow all instructions pertaining to installation and usage for the child. Make certain the child remains in the restraint system at all times when the vehicle is in motion. Findlay Bench Seat Fore-Aft Seat Adjustment Move the control lever at the front of the seat to the left to release the locking mechanism, then exert slight body pressure to move the seat forward or rearward, as desired. In addition to seat belt assemblies, tether belts are in- stalled on suspension-type seats.
Tether belts help se- cure the seat to the floor and are intended to restrain the seat and seat belt in case of an accident or sudden stop. Release the lever to lock the seat in place. Push the seat back and forth to ensure that it is locked in place. 2.12