Freightliner Business Class — Business Class Driver's Manual

Vehicle Access and Features IMPORTANT: Seat belts have a finite life which may be much shorter than the life of the vehicle. Regular inspections and replacement as needed are the only assurance of adequate seat belt se- curity over the life of the vehicle. repeat this step. If the problem continues, replace the three-point seat belt. Seat Belt Operation Three-Point Seat Belt with Komfort Latch WARNING Wear three-point seat belts only as described be- low. In case of an accident or sudden stop, injuries could result from misuse. Three-point seat belts are designed to be worn by one person at a time. 1.

Before driving the vehicle, slowly pull the link end of the three-point seat belt out of the retractor and pull it across your lap (from outboard to inboard) far enough to engage the buckle. If the retractor locks too soon, allow the belt to retract slightly, then slowly pull it out again. 01/18/95 f910004a Fig. 2.11, Fastening the Three-Point Seat Belt 3. Position the shoulder strap diagonally across your chest. If desired, engage the Komfort Latch as fol- lows: 2. Fasten the three-point seat belt by pushing the link into the buckle until it latches. See Fig. 2.11 . Give the belt a tug at the buckle.

If the buckle unlatches, Pull on the shoulder strap to lessen the pressure of the strap on your shoulder and chest. Allow no more than one inch (2.5 cm) of slack between your 2.13