Freightliner Business Class — Business Class Driver's Manual

Pretrip Inspection and Daily Maintenance With a fully charged air system of 125 psi (862 kPa), push in the parking brake control valve knob. The tractor spring parking brakes should release. Push the trailer air supply valve knob in. 47. Test the parking brakes on a 20-percent grade. Pull the parking brake control valve knob or apply the hand brake with the vehicle on a 20-percent grade. If the parking brakes do not hold the vehicle, repair the parking brake system. With the trailer air system charged to 125 psi (862 kPa), the trailer brakes (spring park- ing brakes, if so equipped, or service brakes) should release. Pull the trailer air supply valve knob out.

The trailer brakes should apply. NOTE: For trailers not equipped with spring park- ing brakes, the trailer service brakes automatically apply when the trailer air supply valve knob pops out. 46. Test the service brakes before leaving the lot. When starting to move the vehicle and before pick- ing up speed, test the brakes with the foot valve and parking brake valve to be sure that they will bring the vehicle to a safe stop. If the vehicle has hydraulic brakes, depress the brake pedal, release the parking brake, and check that the brake system warning light goes off. If the warning light remains on after releasing the parking brake, correct the problem before driving off. 9.35