Pretrip Inspection and Daily Maintenance charge the air system until cutoff pressure of 125 psi (862 kPa) is reached. Service Brakes Maximum Allowable Air Leakage in psi (kPa) Per Minute Released Applied Truck or Tractor w/Two Trailers 5 (35) 6 (42) Maximum Allowable Service Brake Air Leakage With the service brakes released, shut down the engine, wait one minute and note the air pressure gauge reading. Observe the air pressure drop in psi (kPa) per minute. Description Charge the air system until cutoff pressure of 125 psi (862 kPa) is reached. With the parking brakes released and the service brake applied, shut down the engine, wait one minute and note the air pressure gauge reading.
Observe the air pressure drop in psi (kPa) per minute. Table 9.4, Maximum Allowable Service Brake Air Leakage WARNING If leakage exceeds the limits shown in Table 9.4 , repair all areas of leakage before driving the vehicle. Before operating the vehicle, be sure that the spring parking brakes on the tractor and the spring park- ing (or service) brakes on the trailer pass the above tests. Otherwise an unexpected parking brake appli- cation could occur, causing some loss of vehicle control and possibly resulting in serious personal injury.
Service Brakes Maximum Allowable Air Leakage in psi (kPa) Per Minute Released Applied Truck or Tractor Only 2 (14) 3 (21) Truck or Tractor w/Single Trailer 3 (21) 4 (28) Maximum Allowable Service Brake Air Leakage Description 45.5 On vehicles with a trailer air brake hookup, check the spring parking brake system by pushing in the trailer air supply valve knob to release the trailer parking brakes. Pull the parking brake control valve knob out. The trailer air supply valve knob must pop out immediately and the tractor and trailer spring parking brakes must both apply. 9.34