Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING REMARK 3 - 77 Normally, do no t open the radiator cap. Wh en checking the coolant level, check the sub-tank whe D o not remove t he cap when the radiator coolant is hot. Boiling coolant may spurt out. After the coolant temperature goes down, turn the c ap slowly to release the pr essure, then remove it 1. Open the eng ine side cover on the lef t side of the chassis , and check that th e coolant is between the FULL and LOW marks on sub-tank (1). If the coolant level is low , add coolant to the FULL evel through the coolant filler port in The coolant may overflow from the sub-ta nk drain hose. This is 2.

After adding coolant, tighten the cap 3. I f the sub tan k is empty, first check f or leakage of water, then remove radia tor cap (2) and check that the coolant water is iner (3) as shown in the e level is low. e side cover. t water is above the bo ttom surface of the stra he diagram on t he right. Add water if th 4. After adding coolant, close the engin