Komatsu — OPERATIONS AND CHECKS AFTER STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION between low until engine within the green 3. Check for abnormal exhaust gas color, noise, or vibration. If any problem is found, contact your Komatsu distributor. STARTING IN COLD WEATHER (Ambient temperature below 10 ° C (50 ° F)) levers when the buzzer sounds 3 - 98 1. Turn fuel contr ol dial (1) to the center positio idling (MIN) an at a mid-range d high idling (MAX) positions an speed for 5 minutes under no l 2. After warm-up i s completed, check gauges an for proper oper Continue to ru coolant tempe range (B). (A): White rang (B): Green ran (C): Red range ation.

If any problem is found, r n the engine under a light lo rature gauge indicator (2) is w e ge (AUTOMATIC WA RMING-UP OPERATION) ing-up device. ant temperature is low (below 30 °C (86 °F)), the warming-up eled if the engine coolant temperature reaches the specified This machine is eq uipped with an automatic warm When the engin e is started, if the engine cool ried out automatically. warming-up operation is canc operation is car The automatic temperature (30 °C (86 °F)) or if the warming- up operation is continued for 10 minutes . If the engine coolant temperature or hydraulic oil temperature are low after the automatic warming-up operatio n, warm the engine up further as follow s.

NOTICE Do not perform o perations or suddenly operate the hydraulic oil is at a low temperature. Always perform operation until the range. This will he hydraulic oil temperature monitor d lp extend the machine life. Do not suddenly a operating tempera ccelerate the engine before the ma ture. Do not run the eng ine at low or high idle for more than will cause oil leaks from the turbocharger oil supply p If it is necessary t o run the engine at idling, apply a time or run the en gine at a mid-range speed. ure caution lamp (3) flashes or th If engine oil press intermittently, sto p the engine and check for the caus