. OPERATION OPERATION allow it to cool down gradually, then stop it. 3 - 100 STOPPING EN NOTICE If th e engine is stop ped without allowing i t to cool down, th ere is danger that the service life of various parts of the engine will be redu ced. Except in If emergencies, nev the engine overh er stop the engine sud eats, do not stop it sud 1. Lower the wo rk equipment to the ground. idling (MIN) positions and 2. Turn fuel con trol dial (1) in the low and run the engin e at low idling spee d for 5 minutes to allow the the engine to gra dually cool down. 3. Turn the key i n ignition switch (2) t o the OFF posit ion (A).
The engine w ill stop REMARK When engine starting switch (2) key is turned to the OFF engine stops, but the machine's main power urned off immediately. lag provided for the controller to memorize the us and then terminate the system. While this p s o p h osition, the engine stops, but t ource is not t urned off immediatel This is a time lag provided for the us and then termin emorize the peration stat ate the system. While this rocess contin ues, the main powe r is maintained. The power olding time v aries depending on t he operation con dition. Also when the cooling fan is used for a cleaning p not turned off i urpose, the e p t s machine's ma mmediately, ven if engine FF osition.
This time lag i s provided to protect the hydraulic ci rcuit, an d in his case, the econds. machine's main power is maintained for seven 4. Remove the k ey from starting swit