Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE CLEANING AND INSPECTION OF FINS OF RADIATOR, OIL COOLER AND AFTER COOLER REMARK CLEANING BY ROTATING COOLING FAN IN REVERSE DIRECTION WARNING sure that the parking brake lever is in the LOCK position. 3. Turn fan rotation selector switch (2) to the cleaning (CLN) position. Fan operation confirmation lamp (3) lights up. 4 - 35 Carry out this proc edure if there is any mud or dirt stuck to the radiator or oil Check the hydrauli c cooler hoses. If any hose is cracked or hardened by age, replace with a new hose.

Also c heck and tighten all loos When cleaning the c ooling fan by turning it in the rev erse direction, make NOTICE When rotating the co oling fan in the reverse direction, be extremely careful of flying dust. Open up the right an d left engine side covers and ch eck that no dust and dirt are accumulated inside the engine room. When the fan operati on confirmation lamp is lighted a nd the fan is turning in the reverse directi on, the machine does not move even if the steering - forward and reverse - gearshift lever is operated to any of the forward, positions. This function is designed to protect the any of the forward, reverse and steering radiator.

the When stopping the e ngine when the cooling fan is ro tating in the reverse direction, first run th e engine at low idling, then stop it. The dust and dirt s tuck to the radiator and coole r can be blown out by rotating the coo ling fan in the reverse directi 1. Turn starting s witch (1) to the "OFF" positio n and stop the engine 2. Turn starting s witch (1) to the "ON" position