. MAINTENANCE SERVICE PROCEDURE 4 - 51 WHEN IT IS IMPOSSIBLE TO CHECK ELECTROLYTE LEVEL FROM SIDE OF BATTERY If it is impossible to check the electrolyte level from the side of the battery, or there is no display of the UPPER LEVEL line on the side of the battery, check as follows. 1. Open the battery cover on the left side of the machine body. 2. Remove tray (1). 3. Remove cap (2) at the top of the battery, look through the water filler port (3), and check the electrolyte surface. If the electrolyte does not reach the sleeve (4), add distilled water so that the level reaches the bottom of the sleeve (UPPER LEVEL line) without fail. (A) Suitable level:
Electrolyte level is up to bottom of sleeve, so surface tension causes electrolyte surface to bulge and poles appear bent. (B) Low: Electrolyte level is not up to bottom of sleeve, so poles appear straight and not bent. 4. After adding distilled water, tighten cap (2) securely. REMARK If water is added to above the bottom tip of the sleeve, use a pipette to remove electrolyte. Neutralize the removed electrolyte with sodium bicarbonate, then flush it away with a large amount of water. If necessary, contact your Komatsu distributor or your battery maker. REMARK If water to remo sodium ve electrolyte. bicarbonate, th Neutraliz en flush it e the remo away wit ved electrolyte h a large amo water.
battery maker. If it is i mpossib le to che ck the ele ctrolyte lev el from LEVEL line on the side of the batt ery, check 1. Ope n the b attery co ver on the left side of the machine b 2. Remove tra y (1). 3. Remove ca p (2) at t he top of th e battery, lo ok through the filler port (3), and check th e electrol yte surface. I electrolyte does not reach the sleeve (4), add distilled wa that the leve l reache line ( ) without fail. A) Suitable level so surfa surface t ce tension causes elect o bulge and poles appear ( B) Low: Electrol yte level is not up to bottom poles ap pear strai ght and not 4.
Afte r addin g distille d water, tig hten cap (2 WHEN IT IS POSSIBLE TO USE INDICATOR TO CHECK ELECTROLYTE LEVEL If it is p ossible t o use a n indicator to check th e electrolyte le vel, follow the instructions give